User's Guide

OM-GRYPHON™

IBM 46XX TERMINAL DATA FORMATTING

To select the data formatting for these IBM Terminals, read one of the code

selections below. (default = IBM Standard).

Conversion to Code 39

Ì$+GD0$-gÎ

 IBM Standard

Ì$+GD1$-lÎ

Mixed IBM Standard + Code 39

Ì$+GD2$-qÎ

IBM DATA FORMATTING (Transmission Format)

The IBM 46xx Series cash register recognizes the following codes:

EAN 8 / EAN13 / UPC A / UPC E with and without Add On

Normal 2/5 Interleaved 2/5

Code 39 Codabar

Code 128 Code 93

The transmission format of codes belonging to this set is specified by the

protocol. Since the reader allows a wider set of codes to be selected, the

following formats are defined to offer the user all the reading possibilities of the

Datalogic product.

Conversion to Code 39 Format

Data from any code selected may be transmitted. Each code is transmitted to

the Host as Code 39. Any character not included in the standard Code 39 set

will be replaced with a “Space” (20 Hex).

IBM Standard Format (default)

Only codes belonging to the above mentioned set may be transmitted. Each

code transmitted to the Host is recognized by the identifier requested by the

protocol. If the selected code does not belong to this set, it wiII not be

transmitted.

MIXED IBM Standard + Code 39 Format

Data from any code selected may be transmitted. For codes belonging to the

above mentioned set, the “IBM Standard Format” is applied. The “Code 39”

Format applies to codes not belonging to this set.