User's Manual

INITIAL SETUP
23
4
Firmly insert the reader into the OM-1000 BT cradle within 4 seconds, a series
of beeps will be emitted, signaling that the OM-1000 BT cradle has been
paired to the Lynx™ BT, and the green LED on the reader will go off.
3.
4.
Complete the desired installation procedure referring to par. 2.1.1;
5.
Configure the OM-1000 BT cradle. Refer to the following procedures
depending on the interface selection code required for your application:
− RS232 Interface (par. 4.1.1)
− Wedge Interface (par. 4.1.2)
− USB Interface (par. 4.1.3)
Green LED