User's Manual

LYNX™ BT
22
4
4 INITIAL SETUP
This procedure allows setting up the reader to operate with the default settings.
Two different procedures are available according to the type of application you are
working with:
− Lynx™ BT paired to the OM-1000 BT (follow procedure in par. 4.1);
− Lynx™ BT communicating with a Bluetooth
®
device (follow procedure in
par. 4.2).
Whenever you need to change the default values refer to par. 5.1.
4.1 SETTING UP LYNX™ BT WITH OM-1000 BT
Follow the given procedure to make Lynx™ BT communicating with OM-1000 BT.
1.
Read the restore default parameters code below.
Restore Lynx™ BT Default
AMHKGPAOFNGNENEIEPANHOGOCK
AHHPMBAMDKEOFMHMLJALECHGIK
AKCBPJCJGIIJCMCFGPLCMMMNLK
AEFBJLBGMHPKMOGNKKNDPDMGGK
AAPHBAJIDGHPOJKEFPNCEACBHK
AFKFBKNGLGMOMELLGOPCMJFKIK
DDDDLDLLLDDLLLLDDDLDDLDLDL
Read the Bind code to pair the Lynx™ BT to the OM-1000 BT cradle.
The reader is dedicated to the cradle. Any previously bound reader will be
excluded.
Bind
2.
AMHOHMFOFNGNENEIEPANHOGOCK
AHPHIJAMDKEOFMHMLJAKFEDGJK
AKCBPJCJGIIJCMCFHKKMEFDFPK
AEFBJLBGMHPLNMDKEBJBKCFFGK
AAPHBAJJCGEBADDAMPPMNPNBDK
AEKFAOMIPLKAKPFHGDMOEGDLIK
DDDLLLLDLDDLLLLDLLLDDLDLLL
The green LED on the Lynx™ BT will blink; the reader is ready to be inserted
into the cradle.