User's Manual

INSTALLATION
7
2
RS232 Connection
CAUTION
Connections should always be made with both PC and Cradle
power off!
The OM-1000 cradle requires the RS232 interface cable and the AC/DC power
adapter to be connected.
To install your cradle to your host system, follow these instructions (see Figure 3
below).
1. After charging the batteries (see par. 1.2), bind the Lynx™ BT to the OM-1000
BT by following the procedure given in par. 4.1.1;
2. Insert the RS232 cable into the OM-1000 cradle;
3. Connect the RS232 interface cable to the proper port on the host terminal;
4. Connect the power cord to the OM-1000 cradle;
5. Connect the AC/DC power adapter at the wall outlet;
6. Upon OM-1000 power up, wait for the series of beeps indicating Bluetooth
connection.
7. Read the RS232 interface code in par. 4.1.1.
8. Power up your PC.
Figure 3 - RS232 Connection