User's Manual

LYNX™ BT
138
10
10.1 INDICATORS
10.1.1 LED Indicators
The following LED indicators signal the reader functions.
LED Behavior
Reader Power On Normal Functioning
Red
(Figure A,1)
blinks briefly, then a beep
occurs. Then, it turns off.
lights when a wrong read
occurs.
lights briefly when the aiming
system is enabled.
Green
(Figure A,2)
lights when a symbol has
been read and decoded.
Single blink every 2 seconds
when BT connection is active.
Double blink every 2 seconds
when BT connection is not
active.
10.1.2 Beeper
The Lynx™ BT basic software provides beeper signals for power on, good/wrong
reading and BT connection activation/deactivation.