User's Manual

LYNX™ BT
12
2
The following figure shows an example Lynx™ BT Slave application.
Figure 1 - Lynx™ BT Slave Application
If the Master Bluetooth
®
device can support a piconet, the communication can be
established with up to 7 seven Slave readers at the same time.
2.2.2 Lynx™ BT as Master
Once set as Master, a Lynx™ BT reader must be configured with the address of the
Slave device to which it wants to communicate.
By default, at startup the reader initializes the communication with the Slave. If the
connection is successful, the reader can send barcodes to the Slave device. Radio
connections can also be managed manually as described in pars., Errore. L'origine
riferimento non è stata trovata. and Errore. L'origine riferimento non è stata
trovata..
During the request of radio connection or disconnection with a remote Bluetooth
®
Slave device, the reader emits a series of ticks and short blinks of the green LED.
The following figure shows an example Lynx™ BT Master application.
Figure 2 - Lynx™ BT Master Application
Laptop
(Bluetooth
®
device)
Lynx™ BT readers
Slave
Slave
Master
Barcode Printe
r
(Bluetooth
®
device)
Slave
Master
Lynx™ BT
Reader