User's Manual

LYNX™ BT
10
2
Figure 5 – USB Connection
NOTE
The OM-1000 cradle is a USB self-powered device.
2.2 OPERATING LYNX™ BT WITH BLUETOOTH
®
DEVICE
During typical operation a physical radio channel is shared by a group of devices that
are synchronized to a common clock and frequency hopping pattern. One device
provides the synchronization reference and is known as the Master. All other devices
are known as Slaves. A group of devices synchronized in this fashion form a piconet.
Most Bluetooth
®
devices can be both Master or Slave. The Master will be the first unit
to initiate the connection (page procedure).
Some devices can only be Slaves (i.e. printers). They can only wait for a Bluetooth
®
Master device to initiate a connection with them.
Lynx™ BT can be either Master or Slave. As Master it can initiate a connection with
only one Slave device.