User Manual

English
3
USING OM-GRYPHON RADIO CRADLE
The OM-GRYPHON cradle, paired with one Gryphon™ series reader, builds
a Cordless Reading System for the collection, decoding and transmission of
barcoded data.
It can be connected to a Host PC through an RS232, Wedge or Pen
emulation cable and is suited for a single-cradle layout.
Once it is powered, the yellow LED goes on. It will blink, only when the cradle
receives data from the gun. The red LED indicates the battery is charging.
Once the battery is charged, the green LED on the cradle goes on.
To setup your OM-GRYPHON cradle you must:
1. Make all system connections.
2. Configure the OM-GRYPHON cradle.
Power on / Data
(yellow LED)
Reconditioning battery
button
Charging
(red LED)
Charge completed
(green LED)