User manual

Accessories
A-10 Pegaso™ Industrial PDA with Windows
®
CE
Belt Clip
The Belt Clip comes with two separate pieces:
one that attaches to the Pegaso, and one that
attaches to your belt.
To install the Belt Clip on the unit, complete
the follo
wing steps:
1. Turn the Pegaso face-down and ensure
that power is off.
2. Orient the Belt Clip on the underside of
the P
egaso.
3. Align the “ears” on the inside of the Belt Clip with the corresponding holes on the
underside of the P
egaso and slide them into place.
4. Push the top of the Belt Clip against the Pegaso and turn the quarter-turn fastener
to secure it.
The Handstrap can be left on when installing the Belt Clip.
Ears