User manual

Networks, Communications, and Connections
4-8 Pegaso™ Industrial PDA with Windows
®
CE
Networking
Setting up the Network ID
To set up your Network ID (configure the Windows user settings, such as the user
name, password, and domain), complete the following steps on the Pegaso:
1. Go to Start > Settings > Control Panel > Owner.
2. Select the Network ID tab on the Owner Properties dialog box.
3. Enter your User Name, Password, and Domain on the Network ID tab.
4. Select OK on the command bar to save your network ID information.
Access basic network connection information by double-tapping on the Network icon in
the system tray. Tap Details to show more information.
The Network Icon
The network icon in the system tray indicates if the network is currently connected or
not.
Figure 4-10. The Network Icon
Network and Dialup Connections
Radio Card settings will vary depending on the type of radio card you are using. For
assistance configuring the Pegaso for your RF network, reference Remote Connections
in the online help on your unit. Reference the documentation for your radio card type
for further information.
11:57 AM
System Tray
Network
Connection Icon
Connected Not Connected