User manual

Configuring the Pegaso
2-20 Pegaso™ Industrial PDA with Windows
®
CE
Power Configuration
To adjust power management settings, select Start > Settings > Control Panel > Power. Use
this control panel to check the charge on the battery or to change the Power settings.
Battery Tab
The Battery tab provides power indicators for External power, Main battery, and Backup
battery
as shown in Figure 2-17 on page 2-20. To save your settings, tap OK on the com-
mand bar, or press <Enter> on the keypad.
Schemes Tab
The Schemes tab allows you to switch the power scheme and specify the Idle settings for
User (in 1-minute increments) or System (in 5-minute increments). You can also specify
Suspend settings in 5-minute increments). To save your settings, tap OK on the com-
mand bar, or press <Enter> on the keypad.
Device Status Tab
The Device Status tab displays the power usage of active devices.
Figure 2-17. Battery and Power Tabs