User manual

Programming Parameters
F-12 Pegaso™ Industrial PDA with Windows
®
CE
User ID
Specifies the symbology identifier (if any) that
is sent when parameter Send Code ID (Index
0025) is set to 3. "ASCII" code zero (null) is
used to indicate that an identifier
is not to be
sent for the symbology
0125
Any single
ASCII
ch
aracter
(00 = Off)
'X' 'X'
'X'
Universal Product Code-A (UPC-A)
Enter 1 for On
and 0 for Off.
Enable
Enables/disables the UPC-A symbology. 0500 On / Off Off On On
Enable
Aggressive
Decoding
Enables more aggressive decoding algorithms
to be used in order to scan hard to read
labels.
0501 On / Off Off On Off
Send Check
Digit
Includes check digit in the label which is trans-
mitted.
0502 On / Off Off On Off
Send Sys-
tem Digit
Includes the system digit in the label transmis-
sion. For UPC-A, the system digit is always
ze
ro.
0503 On / Off Off On On
Convert UPC-
A to EAN-13
Instructs the decoder to expand UPC-A labels
to their EAN-13 equivalents. Any EAN-13
parameters will then apply to the result.
0504 On / Off Off On Off
Read Verifi-
cation
Sets the number of times a label must be read
before it is transmitted.
0520 01 - 04 01 02 01
User ID
Specifies the symbology identifier (if any) sent
when parameter Send Code ID (Index 0025)
is set to 3. "ASCII" code zero (null) is used to
indicate that an identifier is not t
o be sent for
the symbology.
0521
Any single
ASCII
ch
aracter
(00 = Off)
'A' 'A'
'A'
Universal Product Code-E (UPC-E)
Enter 1 for On
and 0 for Off.
Enable Sys-
tem Digit 0
Enables/disables UPC-E labels with a system
digit of zero.
0508 On / Off Off On On
Enable
Aggressive
Decoding
Enables more aggressive decoding algorithms
to be used in order to scan hard to read
labels.
0509 On / Off Off On Off
Send Check
Digit
Includes the check digit in the label which is
transmitted.
050A On / Off Off On Off
Send Sys-
tem Digit
This instructs the decoder to include the sys-
tem digit in the label transmission. For UPC-E,
the system
digit is zero.
050B On / Off Off On Off
Code Parameter/ Description I.D. #
Acceptable
Input
Defaults
Min Max Factory