User's Manual
Table Of Contents
- Falcon® 4400 Series
- with Windows® CE
- Quick Reference Guide
- Table of Contents
- Falcon® 4400 Series with Windows® CE
- Appendix A: PSC Falcon® Windows® CE Series End User License Agreement
- Appendix B: Microsoft® Windows® CE End User License Agreement
- Appendix C: PSC Falcon® Windows® CE Product Series Warranty
- Appendix D: Safety Information
- Appendix E: Laser Safety
Setting Up the Mobile Computer
Quick Reference Guide 15
Setting Up the Mobile Computer
At first use or after a cold reset, the unit will go through a series of initial
bootup sequences. Each of these sequences are described as noted:
1. Touchscreen Calibration, illustrated in Figure 7.
2. Radio Card Setup on page 15.
3. Installing the USB Driver on page 16.
4. Network Setup on page 16.
5. Setting the Date and Time on page 17.
Touchscreen Calibration
Figure 7. Touchscreen Calibration
Getting Connected
Radio Card Setup
For assistance in configuring a radio card, tap the question mark on your Fal-
con to access the Microsoft online help. Windows Zero Config should be used
to administer the radio for cards not specifically listed (for example, DRCB or
Broadcom based radio). Refer to the manufacturer of your radio card for fur-
Follow the on-screen directions to cali-
brate the touchscreen.
For more information on touchscreen
calibration, refer to the PRG.