User Manual
Table Of Contents
- Introduction
- Quick Start Instructions
- Using the PowerScan RF System
- Mounting the Base Station
- RF Programmable Features
- Programming Overview
- What Is Programming Mode?
- The Programming Session
- Programming Sequence
- Scanner vs. Base Station Features
- Interface (I/F) Selection
- Universal Keyboard Wedge I/F Selection
- Terminal/ Keyboard Settings
- RF Beeper Settings
- RF When to Beep
- RF When to Beep Options (continued)
- Radio Transmit Power
- RF Channel Selection
- Transmission Retries Before Message Time- out
- Wait Time for ACK
- Wait Time For Scanner Power Shutdown
- Wait Time Between Retries of Failed Transmission
- HACK Transmit Options
- Wait Time For HACK From Host
- Drop Links on Reset Option
- Drop Oldest Links Option
- Common Configuration
- Set Maximum Linked Scanners
- Source-Radio Identification (ID)
- Low Battery LED Indication
- Maintenance and Troubleshooting
- Standard Warranty
- Sample Bar Codes
- Number Pad
Systems Manual 1
Introduction
About This
Manual
This systems manual provides information and instructions to connect
and configure your PowerScan™ RF system. The following sections are
included in the manual:
• Introduction presents general information about the contents of
this manual and about the system.
• Quick Start Instructions provide easy to follow procedures for
installing your system quickly.
• Using the PowerScan RF System provides details about scanning
basics, system controls and indicators.
• Mounting the Base Station demonstrates ways to securely attach
the Base Station to various work surfaces.
• RF Programmable Features is a set of procedures detailing sys-
tem configuration that is unique to the RF system.
• Maintenance and Troubleshooting provides solutions for prob-
lems that may be encountered during installation and use of
the system.
• is a statement describing the warranty policy covering the sys-
tem.
References Other manuals are available for this product. Printed copies can be
ordered through your distributor. Some manuals can be downloaded at
our website address listed on the back cover of this manual. Read the
terms of use and instructions at the site to download, save, view or
print the most current manual(s) from the internet.
Configurator Express™ On-Screen Programming offers a convenient way
to program your scanner using your PC. Information about ordering a
kit (includes software, adapter and cable) for your RF scanner can also
be accessed from our website (see the back cover of this manual).