User Manual
Table Of Contents
- Introduction
- Quick Start Instructions
- Using the PowerScan RF System
- Mounting the Base Station
- RF Programmable Features
- Programming Overview
- What Is Programming Mode?
- The Programming Session
- Programming Sequence
- Scanner vs. Base Station Features
- Interface (I/F) Selection
- Universal Keyboard Wedge I/F Selection
- Terminal/ Keyboard Settings
- RF Beeper Settings
- RF When to Beep
- RF When to Beep Options (continued)
- Radio Transmit Power
- RF Channel Selection
- Transmission Retries Before Message Time- out
- Wait Time for ACK
- Wait Time For Scanner Power Shutdown
- Wait Time Between Retries of Failed Transmission
- HACK Transmit Options
- Wait Time For HACK From Host
- Drop Links on Reset Option
- Drop Oldest Links Option
- Common Configuration
- Set Maximum Linked Scanners
- Source-Radio Identification (ID)
- Low Battery LED Indication
- Maintenance and Troubleshooting
- Standard Warranty
- Sample Bar Codes
- Number Pad
Systems Manual 23
Transmission
Error Beep
High, then low, then high, then
low.
Indicates unsuccessful
transmission to the host.
Link Beep
Low, then medium, then high.
Indicates a scanner has
been successfully linked to
a base station.
Unlink Beep
High, then medium, then low.
Indicates a scanner has
been successfully unlinked
from a base station.
Field Replace-
able Unit (FRU)
Indications
Varies. Consists of a long tone
followed by multiple short
tones.
Enables service techni-
cians to identify Field
Replaceable Unit (FRU)
errors.
SPEAKER
INDICATION
DURATION COMMENT