User Manual

Troubleshooting
Quick Reference Guide 15
Figure 6. Scanning Bar Codes
Troubleshooting
Troubleshoot your scanning system by performing the following checks:
Troubleshooting the RF System
For the RF system, ensure...
• the battery is charged. See
"Battery Pack Charging and
Maintenance" on page 7
.
• the battery is properly installed. See
"Installing the Battery Pack" on
page 1
.
Decrease...
a
b
...or Increase distance
from bar code to adjust
aiming beam width to
cross all bars.
Sweep stacked bar codes
slowly and smoothly from
top to bottom (or bottom to top).
Stacked