User's Manual

Maintaining the Pegaso
Quick Reference Guide 25
• RF Network PC Card (if present) connects to the network system.
Maintaining the Pegaso
With normal use, the Pegaso, Dock, and Four-Slot Battery Charger require no
maintenance. For trouble-free service, observe the following tips:
• To prolong its life and avoid problems, keep the Pegaso clean. Use a
clean, soft cloth dampened with a mild, dilute cleanser.
• Clean the display with a lens cloth or other soft cloth dampened with a
mild, dilute cleaning solution.
Troubleshooting
Refer to the Pegaso PRG for more information.
Table 7. Troubleshooting Problems, Causes, and Solutions
The custom settings in the registry are persistent.
CAUTION
Never use a pen, pencil, or other sharp object on the display/touch
screen. Use only the supplied stylus or plastic-tipped pens intended
for use with a touch-sensitive screen.
Do not immerse the Pegaso, dock, or battery charger in liquid.
Do not use abrasive paper/cloth or abrasive/corrosive cleaners to
clean the unit.
WARNING
Do not use a sharp object to Reset; use the Stylus. A sharp object
can puncture the button, disabling the reset function, rupturing the
industrial seal, and voiding your warranty. Refer to Resetting the
Pegaso on page 2-22
Problem Possible Cause Solution
The Pegaso does
not turn on.
The battery pack is
not installed properly.
Ensure the battery is installed properly.
System failure.
Perform a cold reset. Refer to Resetting the
Pegaso on page 2-22.
During boot, the
terminal beeps
twice and stays
blank.
Firmware persistent
flash memory has
been corrupted.
Re-download the firmware using the FUU in
bootload mode. Refer to the PRG.