Installation Instructions

General Description
Datalogic is incorporating a radio module in to the current designs. This module is a
complete RF design and no modifications, other then external antennas, are used.
There are two basic systems that integrate this module:
1) A base station used to deliver transmitted data to a host.
2) A hand held scanner that transmits barcode data to the base station.
The radio module used in the design is the same for both the base station and the
hand held scanner. This module has an antenna port that allows the design to
incorporate our own antenna topologies as no antenna is provided with the module.
The module is a Class 1 Bluetooth radio design from Roving Networks using a BC4
CSR Bluetooth chip set. Please see the following datasheet for this module: