PS71KM Bluetooth Module Guidance Document
Statement of Agency Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Class B Compliance Statement The user is cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
General Description Datalogic is incorporating a radio module in to the current designs. This module is a complete RF design and no modifications, other then external antennas, are used. There are two basic systems that integrate this module: 1) 2) A base station used to deliver transmitted data to a host. A hand held scanner that transmits barcode data to the base station. The radio module used in the design is the same for both the base station and the hand held scanner.
The interface to the radio from the on-board processor is identical in both applications using the same base communications format and the exact same pins on the system processor. Both the hand held scanner and base station provide a regulated 3.4VDC to the module as well.
The system uses two different antennas.
The antennas used are as follows: Base Station Antenna
Hand Held Scanner Antenna