User's Manual

Troubleshooting
Quick Reference Guide 17
Figure 4. Scanning Barcodes
Troubleshooting
Troubleshoot your scanning system by performing the following checks:
Troubleshooting the BT System
For the BT system, ensure...
• the battery is charged. See
Battery Pack Charging and
Maintenance on page 12
.
• the battery is properly installed. See
Installing the Battery Pack on
page 7
.
• the reader is linked to the desired Base Station. See the Quick Ref-
erence Guide (QRG) for the Base Station.
• the reader is within reasonable operating range of the Base Station,
with no major obstructions between the radio units such as thick
walls or heavy machinery. (At the time of this writing, maximum
reader-to-Base Station range is specified at 100 meters.) Your range
may vary depending on the environment the system is being used
in.
Decrease...
...or Increase distance
from bar code to adjust
aiming beam width to
cross all bars.
(Green spot provides
good read feedback)