User's Manual

Getting Started
Quick Reference Guide 9
Figure 1. Battery Pack Installation & Removal
Verifying Reader Operation Before Linking
Once a charged Battery Pack has been installed in the reader, scan a good
sample barcode of the symbology
1
type your reader is programmed to
read. If unsure how to do this, see the section on
How to Scan in this
manual. Tip: The part number barcode on the back cover of this manual
is a Code 39 symbology sample.
The system may signal with one or a combination of indicators depend-
ing upon the "connection" status of the reader (see LED and Beeper
Indications for details). If your reader fails to read a sample barcode of a
symbology it is programmed to read, turn to the section titled,
Trouble-
shooting
.
1. To enable more barcode symbology types, reference the Product Reference Guide (PRG).
Scanner
Alignment Pins
Release Latch
Release Latch
Battery
Pack