User's Manual

Datalogic Scanning, Inc
959 Terry Street
Eugene, Oregon 97402
Page 77 10/23/2009
Revision X2
PSKEY_MOD_MANUF6 0x0264 uint16[] none
See the description of PSKEY_MOD_MANUF0.
Key Name Key Number Type Default Setting
PSKEY_MOD_MANUF7 0x0265 uint16[] none
See the description of PSKEY_MOD_MANUF0.
Key Name Key Number Type Default Setting
PSKEY_MOD_MANUF8 0x0266 uint16[] none
See the description of PSKEY_MOD_MANUF0.
Key Name Key Number Type Default Setting
PSKEY_MOD_MANUF9 0x0267 uint16[] none
See the description of PSKEY_MOD_MANUF0.
Key Name Key Number Type Default Setting
PSKEY_DUT_VM_DISABLE 0x0268 bool TRUE
If TRUE, the VM will be disabled when the chip enters radiotest modes (either Bluetooth or CSR-specific
test modes). If FALSE, the VM continues operating. It is recommended this only be set to FALSE if the
VM application is being used to control test mode; this is necessary, for example, in configurations where
no host interface is present.
(Type bool is fundamentally a uint16 with values 0 and 1 mapping to FALSE and TRUE.)
Key Name Key Number Type Default Setting
PSKEY_USR0 0x028a uint16[] none
Keys PSKEY_USR0 to PSKEY_USR49 are for use by host and on-chip application- specific code to
allocate as it chooses.
PSKEY_USR0
to PSKEY_USR24 may only be changed by DFU by placing them in the application
protected section of the file and signing them with the application private key. These pskeys are never
incldued in DFU files uploaded from a BlueCore. This makes them suitable for storing module specific or
sensitive information; use keys in the range PSKEY_USR25
to PSKEY_USR49 if such protection is not
required.
Key Name Key Number Type Default Setting
PSKEY_USR1 0x028b uint16[] none
See the description of PSKEY_USR0.
Key Name Key Number Type Default Setting
PSKEY_USR2 0x028c uint16[] none
See the description of PSKEY_USR0.