User's Manual

Datalogic Scanning, Inc
959 Terry Street
Eugene, Oregon 97402
Page 76 10/23/2009
Revision X2
When the module is intended to be used with certain host-side applications or stacks, this key is set to an
encrypted value.
The host-side application may subsequently check the value of this key to determine whether or not it is
licensed to run with the module.
Key Name Key Number Type Default Setting
PSKEY_VM_DISABLE 0x025d bool FALSE
If TRUE, the VM will not be started when the chip boots. If FALSE, VM operation is normal.
(Type bool is fundamentally a uint16 with values 0 and 1 mapping to FALSE and TRUE.)
Key Name Key Number Type Default Setting
PSKEY_MOD_MANUF0 0x025e uint16[] none
Keys PSKEY_MOD_MANUF0 to PSKEY_MOD_MANUF9 are for use by module manufactuers. The
firmware makes no use of these pskeys' contents.
Keys PSKEY_MOD_MANUF0
to PSKEY_MOD_MANUF4 are protected against DFU; they are never
included in uploads, and are ignored in downloads. This makes them suitable for storing module specific or
sensitive information; use keys in the range PSKEY_MOD_MANUF5
to PSKEY_MOD_MANUF9 if such
protection is not required.
Key Name Key Number Type Default Setting
PSKEY_MOD_MANUF1 0x025f uint16[] none
See the description of PSKEY_MOD_MANUF0.
Key Name Key Number Type Default Setting
PSKEY_MOD_MANUF2 0x0260 uint16[] none
See the description of PSKEY_MOD_MANUF0.
Key Name Key Number Type Default Setting
PSKEY_MOD_MANUF3 0x0261 uint16[] none
See the description of PSKEY_MOD_MANUF0.
Key Name Key Number Type Default Setting
PSKEY_MOD_MANUF4 0x0262 uint16[] none
See the description of PSKEY_MOD_MANUF0.
Key Name Key Number Type Default Setting
PSKEY_MOD_MANUF5 0x0263 uint16[] none
See the description of PSKEY_MOD_MANUF0.
Key Name Key Number Type Default Setting