User's Manual

Datalogic Scanning, Inc
959 Terry Street
Eugene, Oregon 97402
Page 33 10/23/2009
Revision X2
7 <reserved> Write Alias Authentication Enable
byte 14
0 <reserved> Read Anonymous Address Change Parameters
1 <reserved> Write Anonymous Address Change Parameters
2 <reserved> Reset Fixed Address Attempts Counter
3 Read Local Version Information
4 <reserved> Read Local Supported Commands
5 Read Local Supported Features
6 Read Local Extended Features
7 Read Buffer Size
byte 15
0 Read Country Code
1 Read BD ADDR
2 Read Failed Contact Count
3 Reset Failed Contact Count
4 Get Link Quality
5 Read RSSI
6 Read AFH Channel Map
7 Read BD Clock
byte 16
0 Read Loopback Mode
1 Write Loopback Mode
2 Enable Device Under Test Mode
3 Setup Synchronous Connection
4 Accept Synchronous Connection
5 Reject Synchronous Connection
6 <reserved>
7 <reserved>
byte 17
0 Read Extended Inquiry Response
1 Write Extended Inquiry Respone
2 Refresh Encryption Key
3 <reserved>
4 Sniff Subrating
5 Read Simple Pairing Mode
6 Write Simple Pairing Mode
7 Read Local OOB Data
byte 18
0 Read Inquiry Response Transmit Power
1 Write Inquiry Response Transmit Power
2 Read Default Erroneous Data Reporting
3 Write Default Erroneous Data Reporting
4 <reserved>
5 <reserved>
6 <reserved>
7 IO Capability Response
byte 19