User's Manual

Datalogic Scanning, Inc
959 Terry Street
Eugene, Oregon 97402
Page 118 10/23/2009
Revision X2
called to retrieve hq packets over spi, when there is no Host transport.
(Type bool is fundamentally a uint16 with values 0 and 1 mapping to FALSE and TRUE.)
Key Name Key Number Type Default Setting
PSKEY_PANIC_ON_FAULT 0x21ce bool FALSE
This pskey allows panic on fault to be enabled, faults then generate a panic rather than a fault report.
(Type bool is fundamentally a uint16 with values 0 and 1 mapping to FALSE and TRUE.)
Key Name Key
Number
Type Default Setting
PSKEY_MR_CLASS1_TX_OFFSET_HALF_MHZ 0x21cf int16 -1
Offset used for Class 1 MR transmit, in units of 500 kHz.
This key should only be changed on advice from CSR.
(The abbreviation MR for Medium Rate is used consistently in place of EDR for Enhanced Data Rate
throughout the PS keys as many were introduced before the abbreviation EDR came into use.)
Key Name Key Number Type Default Setting
PSKEY_MR_TX_OFFSET_HALF_MHZ 0x21d0 int16 -1
Offset used for Class 2 MR transmit, in units of 500 kHz.
This key should only be changed on advice from CSR.
(The abbreviation MR for Medium Rate is used consistently in place of EDR for Enhanced Data Rate
throughout the PS keys as many were introduced before the abbreviation EDR came into use.)
Key Name Key
Number
Type Default Setting
PSKEY_CLASS1_TX_OFFSET_HALF_MHZ 0x21d1 int16 -2
Offset used for Class 1 basic rate transmit, in units of 500 kHz.
This key should only be changed on advice from CSR.
Key Name Key Number Type Default Setting
PSKEY_IQ_TRIM_CONTROL 0x21d2 uint16 0x0001
This key is used to control the IQ trim algorithm(s)
This key should only be changed on advice from CSR.
Key Name Key
Number
Type Default Setting
PSKEY_SLOW_CLOCK_SNIFF_SAMPLING 0x21d3 bool TRUE