User's Manual

Datalogic Scanning, Inc
959 Terry Street
Eugene, Oregon 97402
Page 115 10/23/2009
Revision X2
Multiplexed with PIO 13 on all pre BC5 chips. On some later chips it may be multiplexed with PIO 21
instead. Consult your data sheet for exact details. To use as a PIO line, the AMUX must be set to `Select
AIO1 as a PIO'.
The clock routing options are not available on BC3-MM. On BC5 chips write the values 0xbe or 0xfe
(using Entry -> Edit Raw) to route the crystal or crystal/2 clock on AIO1 respectively.
Key Name Key Number Type Default Setting
PSKEY_AMUX_AIO2 0x0421 ana_amux_sel none
Analogue muliplexer setting for the AIO 2 line on BlueCore.
Multiplexed with PIO 14 where present. To use as a PIO line, the AMUX must be set to `Select AIO2 as a
PIO'.
Key Name Key Number Type Default Setting
PSKEY_AMUX_AIO3 0x0422 ana_amux_sel none
Analogue muliplexer setting for the AIO 3 line on BlueCore.
Multiplexed with PIO 15 where present. To use as a PIO line, the AMUX must be set to `Select AIO3 as a
PIO'.
Key Name Key
Number
Type Default Setting
PSKEY_LOCAL_NAME_SIMPLIFIED 0x0423 local_name_complete none
On firmware builds prior to 18, the local name is represented in the Persistent Store by a collection of keys.
This key provides an easy way to manipulate those keys.
See the description at key PSKEY_LOCAL_NAME0 for more information.
Key Name Key Number Type Default Setting
PSKEY_EXTENDED_STUB 0x2001 uint16 0
A key that can be harmlessly read or written.
Key Name Key
Number
Type Default
Setting
PSKEY_TEMPERATURE_VS_DELTA_EXTERNAL_PA 0x21b6 temperature_calibration[] { 0, 0 }
Table in the same form as PSKEY_TEMPERATURE_VS_DELTA_INTERNAL_PA used for the
EXTERNAL power amplifier.
This replaces PSKEY_TEMPERATURE_VS_DELTA_EXTERNAL_PA_CLASS1, as the temperature
compensation of the external PA is now independent of the external PA switching.
Key Name Key
Number
Type Default Setting
PSKEY_SLOW_CLOCK_TEMP_HYSTERESIS_MIN 0x21b8 uint16 1