User Guide

Getting Started

FIRST TIME SETUP

This section will guide you through the necessary steps to set up the DL3™ drive

for the first time around. It is highly recommended that you set a new

administrator password using alphanumeric characters.

Step 1: Connect the DL3™ to your computer with the included USB cable.

Step 2: At the

startup screen

press [START].

Step 3: Enter the

default password

000000.

Then press the [↵]

symbol.

Step 4: Press the

[SETUP] button on

the touch screen.

If it is not selected

within 3 seconds,

the DataLocker

DL3™ will connect

to the computer

automatically.

Step 5: At the setup

menu press the

[CHANGE PASSWORD]

button.