Owners manual

21
Advanced
RFID AUTHENTICATION
The DL3 features an optional RFID module for a 2
nd
layer of authentication. A
maximum of 3 RFID tags can be registered on each DL3 drive. RFID models of
the DL3 come with 2 RFID tags. If you would like to pair your own tag, the DL3
RFID module supports ISO 14443A and ISO 15693 with a frequency of 13.56 MHz.
Step 1: If the drive is currently connected,
press the [DISCONNECT] button and then
press the [CONNECT] button on the next
screen. Otherwise, connect the DL3 drive to
your computer.
Step 2: Once at the keypad screen,
enter the administrator password. If
the password has not been
changed, enter the default
password 000000 and press the [↵ ]
symbol.
Step 3: Press the [SETUP] button on
the touch screen. If the [SETUP]
button is not selected within 3
seconds, the DataLocker DL3™ will
automatically connect to the host
computer.