Owners manual

USER PASSWORD

The DL3 supports the creation of a user password. The user will have access to all

data on the drive; however, the user will not be able to access certain

administrative options and controls.

Note: You must change the default administrator password before creating a

user password.

Step 1: Power on your DL3 by plugging

it in to your computer. If the drive is

already connected, press the

[DISCONNECT] button and then press

the [CONNECT] button on the next

screen.

Step 2: Once at the

keypad screen,

enter the admin

password. If the

password has not

been changed,

enter the default

Step 3: Press the

[SETUP] button on the

touch screen. If the

[SETUP] button is not

selected within 3

seconds, the

DataLocker DL3™ will

Password, 000000, and press the [↵ ]

symbol.

automatically connect to the host

computer.

Step 4: At the setup menu press the [USER PASSWORD] button.