Specifications
i50 Manual (5.10)
Page 23
© 2015 Datalink Systems, Inc.
www.datalinksystemsinc.com
Figure 4 – Editing Settings
Settings can also be read from and written to the PC disk drive for future use using the Load/Save
New Values buttons. Note that these buttons work with the local settings copy, and do not read/write
to the asset.
Click on the Send New Values button to write the modified values to the device. A confirmation
window will be shown to indicate which settings will be changed (Figure 5). Click OK to write the
values to the i50. The programmer will then read back the values to make sure they match OK.
Figure 5 – Confirm Setting Changes