Specifications

36
4. Enter the port or port range. You can enter up to five ports or port ranges.
· Single port — enter the port number in both fields.
· Port range — enter the beginning port number in the left field and the ending port number in the right field.
5. For each port number or range, select the protocol (TCP, UDP, or both) used by that port or port range.
6. Click Hide.
7. Click the Apply button.
Port Forwarding
The Port Forwarding screen allows you to enter the local static IP address for each application that you want
to receive traffic from the internet.
NOTE
You will need to set up static IP addresses on your WLAN for each device that has an application to which you
want to forward.
1. From the Port Forwarding screen, select the checkbox for the application you want to enable.
2. Type the local static IP address of the device hosting the application into the IP Address on WLAN box.
3. Click the Apply button when you are finished adding applications.