Safety data sheet

SAFETY DATA SHEET
713046 IPA CLEANER FOR THERMAL PRINTER HEADS 400ML
Page:
4
6.2. Environmental precautions
Environmental precautions:
Do not discharge into drains or rivers.
6.3. Methods and material for containment and cleaning up
Clean-up procedures:
Absorb into dry earth or sand. Mix with sand or vermiculite. Refer to section 13 of SDS for
suitable method of disposal. Avoid all incompatible materials in clean-up procedure -
see section 10 of SDS.
6.4. Reference to other sections
Reference to other sections:
Refer to section 8 of SDS. Refer to section 13 of SDS.
Section 7: Handling and storage
7.1. Precautions for safe handling
Handling requirements:
Prevent contact with water. Use non-sparking tools. Smoking is forbidden. Ensure there
is sufficient ventilation of the area.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions:
Store in cool, well ventilated area. Keep away from sources of ignition. Keep container
tightly closed. Keep away from direct sunlight. Prevent the build up of electrostatic
charge in the immediate area. Avoid contact with water or humidity. Ensure lighting and
electrical equipment are not a source of ignition.
Suitable packaging:
Must only be kept in original packaging.
7.3. Specific end use(s)
Specific end use(s):
No data available.
Section 8: Exposure controls/personal protection
8.1. Control parameters
Hazardous ingredients:
PROPAN-2-OL
Respirable dustWorkplace exposure limits:
State 8 hour TWA 15 min. STEL 8 hour TWA 15 min. STEL
UK 999 mg/m3 1250 mg/m3 - -
8.1. DNEL/PNEC Values
DNEL / PNEC
No data available.
8.2. Exposure controls
Engineering measures:
Ensure lighting and electrical equipment are not a source of ignition. Ensure there is
sufficient ventilation of the area.
Respiratory protection:
Self-contained breathing apparatus must be available in case of emergency.
Hand protection:
Nitrile gloves. Breakthrough time of the glove material > 8 hours.
[cont...]