Certifications 2
Table Of Contents
- Label remover spray
- SECTION 1: Identification of the substance / mixture and of the company / undertaking
- SECTION 2: Hazards identification
- SECTION 3: Composition / information on ingredients
- SECTION 4: First aid measures
- SECTION 5: Firefighting measures
- SECTION 6: Accidental release measures
- SECTION 7: Handling and storage
- SECTION 8: Exposure controls / personal protection
- SECTION 9: Physical and chemical properties
- SECTION 10: Stability and reactivity
- SECTION 11: Toxicological information
- SECTION 12: Ecological information
- SECTION 13: Disposal considerations
- SECTION 14: Transport information
- SECTION 15: Regulatory information
- SECTION 16: Other information
SECTION 5: Firefighting measures
5.1. Extinguishing media
5.2. Special hazards arising from the substance or mixture
5.3. Advice for firefighters
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.2. Environmental precautions
6.3. Methods and material for containment and cleaning up
6.4. Reference to other sections
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Extinguish with alcohol-resistant foam, carbon dioxide, dry powder or water fog.
Aerosol containers can explode when heated, due to excessive pressure
build-up. Gases that are dangerous to health may be formed in a fire: carbon
monoxide (CO) , carbon dioxide (CO2) .
Wear necessary protective equipment. For personal protection, see section 8.
Reference is made to the company fire procedure. If risk of water pollution
occurs, notify appropriate authorities. Avoid breathing fire vapours. Containers
close to fire should be removed immediately or cooled with water.
For personal protection, see section 8. Do not smoke or use open fire, or other
sources of ignition.
Contain spillages with sand, earth or any suitable absorbent material. Provide
ventilation and confine spill. Do not allow runoff to sewer. Do not let washing
down water contaminate ponds or waterways. Contact local authorities in case of
spillage to drain/aquatic environment.
Clean contaminated area with oil-removing material. For waste disposal, see
section 13.
See section 8 and section 13.
Avoid contact with skin and eyes. Avoid inhalation of vapours and spray mists.
Keep away from heat, sparks and open flame. Provide good ventilation.
Mechanical ventilation or local exhaust ventilation may be required. Risk of
vapour concentration on the floor and in low-lying areas. Take precautionary
measures against static discharges. When using do not eat, drink or smoke.
Wash hands before breaks and before smoking, eating or drinking.
Suitable extinguishing media
Fire and explosion hazards
Personal protective equipment
Fire fighting procedures
Personal protection measures
Environmental precautionary
measures
Cleaning method
Other instructions
Handling
Label remover spray - Version 5 Page 4 of 13
This document is created with Publisher (EcoOnline) Revision date 25.06.2019