Safety data sheet

SAFETY DATA SHEET
713043 LABEL REMOVER PEN 15ML
Page:
3
5.2. Special hazards arising from the substance or mixture
Exposure hazards:
In combustion emits toxic fumes of carbon dioxide / carbon monoxide.
5.3. Advice for fire-fighters
Advice for fire-fighters:
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact
with skin and eyes.
Section 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Personal precautions:
Refer to section 8 of SDS for personal protection details. If outside do not approach from
downwind. If outside keep bystanders upwind and away from danger point. Turn leaking
containers leak-side up to prevent the escape of liquid.
6.2. Environmental precautions
Environmental precautions:
Do not discharge into drains or rivers. Contain the spillage using bunding.
6.3. Methods and material for containment and cleaning up
Clean-up procedures:
Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for
disposal by an appropriate method.
6.4. Reference to other sections
Reference to other sections:
Refer to section 8 of SDS.
Section 7: Handling and storage
7.1. Precautions for safe handling
Handling requirements:
Avoid direct contact with the substance. Ensure there is sufficient ventilation of the area.
Avoid the formation or spread of mists in the air.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions:
Store in cool, well ventilated area. Keep container tightly closed.
Suitable packaging:
Must only be kept in original packaging.
7.3. Specific end use(s)
Specific end use(s):
No data available.
Section 8: Exposure controls/personal protection
8.1. Control parameters
Workplace exposure limits:
No data available.
8.1. DNEL/PNEC Values
DNEL / PNEC
No data available.
8.2. Exposure controls
Engineering measures:
Ensure there is sufficient ventilation of the area.
[cont...]