Product manual

Product Manual - DM991 Series V Family - 204.4092.08 45

10.4. Choosing Equipment to be Configured

# --------------------------------------------------------------------------

# D A T A C O M

# DM991C - G.SHDSL Modem - E1 and V.35 Interfaces

# --------------------------------------------------------------------------

# Choose Equipment

# *1 - DM991C - G.SHDSL Modem - E1 and V.35 Interfaces

# Option: [ ]

# --------------------------------------------------------------------------

# <ESC> Back <ENTER> Refresh

# --------------------------------------------------------------------------

In this menu the user chooses if he wishes to configure the local or the remote equipment, as long as it is

enabled for remote configuration. A list of manageable equipments will be shown, in such way that the

ones capable of management at that time will be signaled by a * along side its number on the menu.

Through the number presented on the list, the equipment to be configured is chosen. The first equipment

on the list is always the local.

For each manageable equipment, there is a Main Menu distributed in the following way:

# --------------------------------------------------------------------------

# D A T A C O M [ 1 ]

# DM991C - G.SHDSL Modem - E1 and V.35 Interfaces

# --------------------------------------------------------------------------

# Main Menu

# 1 - Configuration menu

# 2 - Tests menu

# 3 - Status menu

# 4 - Performance menu

# F - Firmware download to local equipment

# Option: [ ]

# --------------------------------------------------------------------------

# <ESC> Back

# --------------------------------------------------------------------------

• 1 - Configuration menu: allows the general equipment or interfaces characteristics to be

configured.

• 2 - Test menu: Allows the activation of the available tests.

• 3 - Status menu: Allows the equipment or interface general status visualization.

• 4 -Performance Menu: Allows the G.shdsl interface performance parameters visualization.

If an equipment is listed, however without the *, it means there already is a manager acting in th

equipment at that time.