Specifications

Operations Manual, Redundant System Controllers 209351 REV B 93
• In the next window, select the following as shown in Figure 7-11: Bits per
Second: 9600; Data bits: 8; Parity: None; Stop bits: 1; Flow control: none.
Click “OK”.
• Normally, the RCP will not echo back characters typed by the user in a
Terminal window. For added security and convenience, turn on Local Echo
in the HyperTerminal application. To do so, select the following from the Hy-
perTerminal menu: File → Properties → Settings → ASCII setup. This will
bring up a window similar to that shown in Figure 7-12. In this window,
check the box marked “Echo typed characters locally” and click “OK”.
NOTE: Due to a software bug on some versions, this feature may not work.
Do not use versions prior to 6.3. Download the latest version of HyperTermi-
nal at http://www.hilgraeve.com.
Figure 7-11: Communication Properties
Figure 7-12: ASCII Setup