Specifications

92 209351 REV B Operations Manual, Redundant System Controllers
The following procedure will guide the user through the remote terminal setup, using
the Windows 95/98 HyperTerminal software. The RCP must be connected to a PC
com port and configured to use TMSP with 9600 Baud rate prior to setting up the PC
configurations.
• Start the Windows HyperTerminal Program (default Windows location at
Programs — Accessories — HyperTerminal).
• Enter the name of your serial connection (“Compact Outdoor SSPA” for
example), and then click “Ok” button. See Figure 7-9.
• Select direct connection to the PC communication port (Com1 for example),
which meant to be used for communication with RCP unit, and then click
“OK” Button. See Figure 7-10.
Figure 7-9: Connection Description
Figure 7-10: Communication Port Selection