Specifications

70 209351 REV B Operations Manual, Redundant System Controllers
6.4.2 Installing a New Power Supply Module
First, ensure that the new power supply module is the same type as the one
beng replaced! See Section 2.6 to review the different power supply module
types.
To install a new power supply module into the RCP chassis, perform the following
steps:
1. Plug together the quick-connect power pole connectors;
2. Slide the module into the chassis, taking care not to pinch the power cables;
3. Tighten the two captured thumbscrews to secure the module to the chassis.