Specifications
Operations Manual, Redundant System Controllers 209351 REV B 67
Step 5: After all connections have been made and all zip files unpacked, locate the
batch file within the \_code subfolder which suits your LPT port designation (For
example: prg_LPT1.bat for LPT1 parallel port) and run it. The batch file will open a
Command prompt console window and execute the firmware update. Do not interfere
with the program until the entire process is complete.
A terminal window with a black background will appear (See Figure 6-2). Watch for
messages on that window while your unit is being updated.
The new firmware becomes active immediately.
Step 5: Optional step. To restore default Windows parallel port behavior run the
EnableWarmBoot.reg utility.
Figure 6-2: Firmware Upgrade Terminal Window