Specifications

Operations Manual, Redundant System Controllers 209351 REV B 65
6.0 Introduction
The RCP series of redundant controllers has been designed to be maintenance free.
The only user replaceable parts are the AC input fuses.
6.1 Fuse Replacement
The AC input fuses are 2 Amp Slow Blow style fuses and are accessible at the AC
input entry module. Figure 6-1 shows the location of the input fuses as well as internal
part identification. Note that there is also an on/off switch located on the AC input entry
module. The fuse part number is Littlefuse 217002, 2 Amp.
Section 6: Maintenance & Troubleshooting
Figure 6-1: Controller Internal Part Identification and Rear Panel Fuse Location