Specifications

Operations Manual, Redundant System Controllers 209351 REV B 25

3.3 Local (Front Panel) Menu Structure

Figure 3-4 shows the VFD Menu Structure hierarchy. There are six main levels of menu

selections.

1. Sys.Info – System Information menu sublevel

2. Com.Setup – Serial Communication related settings

3. Operation – System operation related settings

4. Flt.Setup – Fault handling settings

5. Options – Miscellaneous settings and functions

6. Calibr. – Calibration related functions

Main Menu navigation is available by pressing five buttons on the front panel keypad:

the Left Arrow (◄) key, Right Arrow (►) key, Up Arrow (▲) key, Down Arrow (▼)

key and the Enter key. The bottom right corner of the VFD display shows the item

selection. All selectable items have a sequential number.

The user can increment or decrement the selected item number by using Left Arrow

(◄) and Right Arrow (►) keys. Selection is final when the operator presses the Enter

key. Pressing the Main Menu key brings the menu level to the main menu page from

any stage of the menu selection.

Some items within the menu structure have alternative methods for value selection.

When this type of selection is specified, the selection keys are: Up Arrow (▲) and Down

Arrow (▼) keys for selecting numbers in x10 increments and Left Arrow (◄) and Right

Arrow (►) keys for x1 increments. Selection is always specified by special notation on

the far right hand side of the VFD.

Note: When the “Fault Latch” option is selected (as described in Section

3.3.4.5), pressing the Enter key will clear all system faults.

Figure 3-4: Main Menu Initial Menu Selection

2.Com Setup1.Sys Info 3.Operation 4.Flt. Setup 6.Calibr.

Main Menu

Informative Menu Layer

5.Options