Specifications

Operations Manual, Redundant System Controllers 209351 REV B 13
2.0 Introduction
This section provides information for the initial inspection, installation, and external
connections for the RCP2/FPRC series redundant system controllers.
2.1 Inspection
When the unit is received, an initial inspection should be completed. First ensure that
the shipping container is not damaged. If it is, have a representative from the shipping
company present when the container is opened. Perform a visual inspection of the
equipment to make sure that all items on the packing list are enclosed. If any damage
has occurred or if items are missing, contact:
Teledyne Paradise Datacom LLC
328 Innovation Blvd., Suite 100
State College, PA 16803 USA
Phone: [phone]
Fax: [phone]
2.2 Mounting
The Teledyne Paradise Datacom Redundant Control Panel is designed to be mounted
in a standard EIA 19 inch equipment rack. The depth of the chassis, excluding rear
panel connectors, is 13.19 inches (335 mm). The height of the RCP2/FPRC chassis is
1.7 inches (44 mm) or 1 rack unit. Optional 22 inch (559 mm) rack slides with
extensions are available.
2.3 Storage and Shipment
To protect the RCP2/FPRC during storage or shipping, use high quality commercial
packing methods. Reliable commercial packing and shipping companies have the
facilities and materials to adequately repack the equipment.
2.4 Cable Connections
The RCP2/FPRC controller has a wide range of I/O interconnections available at the
rear panel. The controller rear panel is shown in Figure 2-1.
Section 2: Description
Figure 2-1: RCP2/FPRC-1100/1200 Rear Panel