Specifications

120 209351 REV B Operations Manual, Redundant System Controllers
Choose a log file location by clicking the Browse... button. The default is the "My Docu-
ments" folder. The log file name will be the UnitID and the extension ".log" appended
to it. i.e. "Unit1.log".
C.2 RCP2 overview for the Universal M&C
Each RCP in the M&C has four screens. The first screen is the “Status” window shown
in Figure C-2. The status screen reflects the Online/Standby status of each amplifier in
the system, and the switch position of each waveguide switch in the system. In addi-
tion, Internal and Device fault indicators are displayed. When there is no fault condition
on a given unit, the indicator illuminates green. When a fault condition exists, the indi-
cator illuminates red.
The second screen is the “IP Setup” window, shown in Figure C-3. It shows the user
all of the TCP/IP settings on the RCP unit. When the IP Address is modified the RCP
unit must be reset for it to use the new IP Address. Until the RCP unit is reset it will use
the old IP Address. The Amplifier Local Port is the port that the RCP unit monitors for
UDP requests. The RCP unit also answers requests using the same port.
Figure C-2: Status Window
Figure C-3: IP Setup Window