Specifications

Operations Manual, Redundant System Controllers 209351 REV B 113
4. On the RCP unit front panel select sequentially:
Main Menu → 2.Com.Setup → 4.Interface → 3.IPNet, then press Enter. The RCP unit
is now set up to work with Ethernet Interface. You may now ping the RCP unit from the
host PC:
C:\>ping 192.168.0.0
This will display:
Pinging 192.168.0.0 with 32 bytes of data:
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Ping statistics for 192.168.0.3:
Packets: Sent=4, Received=4, Lost=0 (0%loss),
Approximate round trip times in milli-seconds:
Minimum=0ms, Maximum=0ms, Average=0ms
5. Run the Teledyne Paradise Datacom Universal M&C package on the host PC to
check all M&C functions. Refer to Appendix E for details. When prompted, select an
Internet connection to the unit using IP Address 192.168.0.0, local port address to
1039 and remote port address to 1038. The RCP is now connected to your host work-
station for remote M&C.