Specifications

112 209351 REV B Operations Manual, Redundant System Controllers

2.4 After optional reboot, open the Command Prompt console window and enter:

C:\>IPCONFIG

This will display the IP settings:

0 Ethernet Adapter:

IP Address: 192.168.0.3

Subnet Mask: 255.255.255.0

Default Gateway:

2.5 You can now try to Ping your PC:

In Command Prompt window enter the following:

C:\>ping 192.168.0.3

This will display:

Pinging 192.168.0.3 with 32 bytes of data:

Reply from 192.168.0.3: bytes=32 time<10ms TTL=128

Ping statistics for 192.168.0.3:

Packets: Sent=4, Received=4, Lost=0 (0%loss),

Approximate round trip times in milli-seconds:

Minimum=0ms, Maximum=0ms, Average=0ms

Your network LAN card is now set up.

3. On the RCP unit front panel, select sequentially:

Main Menu → 2.Com.Setup → 5.IPSetup → 2.LocalIP and then select address

192.168.0.0 by using the [▲] [▼] [◄] [►] keys. Then press Enter.

Follow the same menu route to select the Subnet, Gateway, IPPort and IPLock items,

and set those parameters to: Subnet:255.255.255.0; Gateway:0.0.0.0; IPLock:

255.255.255.255; IPPort:1038. Verify the selected parameters by choosing item

1.IPInfo.