Specifications

VS-1200-S Data Acccess Switch48

Whether or not to trust the host key is your choice. Connecting within a company network, you

might feel that all the network users are on the same side and spoofing attacks are unlikely, so you

might choose to trust the key without checking it. Connecting across a hostile network (such as the

Internet) you should check with your system administrator.

Step 4. After you have connected, you will be asked to login as:, type Administrator (default

value) and press the Enter key. At the Administrator@hostname (or IP address)'s password:

prompt, type admin (default value) and press the Enter key to display the command line > prompt.

To see a list of available commands, at the > command line prompt, type ? and press the Enter key .

Step 5. Type Exit and press the Enter key to end the connection session. Close PuTTy.

4.7 SNMP Configuration

IMPORTANT: SNMP MUST be enabled and there MUST be at least one SNMP user for the

SNMP feature to work.

Once installation of the Link Aggregation Tap has been completed in your chosen network location,

if at least one SNMP user has not been created, refer to the CLI Command Set to:

Step 1. SET SNMPv3 (SE V3) [ON].

Step 2. SET SNMPV3 SUPERUSER (SE V3 SU) name auth authPass priv privPass

Use your Network Management System to access the Link Aggregation Tap to perform GET, SET,

TRAP, etc. SNMP functions.

The Appendix A - Agent Capabilities MIB , Appendix B - Power Supply MIB and Appendix

C - Structure of Management MIB sections are for your reference.

RELEASE NOTES:

1. When adding a TRAP destination, any specified snmpTargetAddrTagList string must be

restricted to alphanumeric characters (0-9, a-z, A-Z).

63 71