Specifications

VS-1200-S Data Acccess Switch30
© 2011 Datacom Systems Inc
4.1.4.19 SET SSH KEY (SE SH KY)
This command sets the SSH service (default ENABLED) process. It is entered as shown:
SET SSH KEY (SE SH KY) [RSA or DSA] — RSA and DSA are algorithms for public-private-
key cryptography. Cut and paste the PEM (Privacy Enhanced Mail) encoded RSA or DSA key.
Example 1:
# SE SH KY RSA
Please cut & paste the PEM encoded rsa SSH key . . . <--right mouse click if Putty or Terra Term
rsa SSH Key successfully loaded
#
Example 2:
> SE SH KY DSA
Please cut & paste the PEM encoded dsa SSH key . . . <--right mouse click if Putty or Terra Term
dsa SSH Key successfully loaded
#
4.1.4.20 SET PING (SE PI)
This command enables or disables PING (default ENABLED) service process. It is entered as
shown:
SET PING ENABLE (SE PI EN) [OFF or ON]
Example 1:
# SE PI EN OFF
The PING protocol is now disabled.
#
Example 2:
# SE PI EN ON
The PING protocol is now disabled.
#
4.1.4.21 SET SNMPv3 (SE V3)
This command sets the SNMP service (default ENABLED) process. It is entered as shown:
SET SNMPv3 (SE V3) [OFF or ON]
Example 1:
# SE V3 OFF
The SNMP protocol is now disabled.
#
Example 2:
> SE V3 ON
The SNMP protocol is now enabled.
#