Specifications

Initial Configuration 29
© 2011 Datacom Systems Inc
4.1.4.16 SET UPGRADE (SE UP)
This command sets the FLASHutils service (default ENABLED) process. It is entered as shown:
SET UPDATE (SE UP) [OFF or ON]
Example 1:
# SE UP OFF
The FlashUtils protocol is now disabled.
#
Example 2:
# SE UP ON
The FlashUtils protocol is now enabled.
#
4.1.4.17 SET TELNET (SE TT)
This command sets the TELNET service (default ENABLED) process. It is entered as shown:
SET TELNET (SE TT) [OFF or ON]
Example 1:
# SE TT OFF
The Telnet protocol will be disabled at end of session.
#
Example 2:
# SE TT ON
The Telnet protocol will be enabled at end of session.
#
4.1.4.18 SET SSH (SE SH)
This command sets the SSH service (default ENABLED) process. It is entered as shown:
SET SSH (SE SH) [OFF or ON]
Example 1:
# SE SH OFF
The SSH protocol will be disabled at end of session.
#
Example 2:
> SE SH ON
The SSH protocol will be enabled at end of session.
#