Specifications

VS-1200-S Data Acccess Switch22

SSH protocol: enabled

Ping protocol: enabled

SNMPv3 protocol: enabled

The following SHOW commands, with other qualifiers, displays more specific information.

4.1.3.4 SHOW GROUPS (SH GR)

This command displays all ports as designated by the administrator (Superuser) as belonging to the

same logical group. Specifically, groups can be configured as if they were a single logical port,

enabling a high degree of control during both the initial setup and all subsequent moves or changes.

The GROUP NAME followed by the ports included in the group are displayed. It is entered and

displays data as shown:

> SHOW GROUPS (SH GR)

Example:

> SH GR

TAP:

9: Port 9

10: Port 10

4.1.3.5 SHOW MANAGEMENT (SH MA)

This command displays Management RJ45 port information as shown:

> SHOW MANAGEMENT (SH MA)

Example:

> SH MA

Security Version: 1.0.0.14

MAC Address: 00-14-e2-00-10-d3

IP Address: 192.168.1.1

IP Subnet: 255.255.0.0

IP Default Gateway: 192.168.1.0

IP Port: 2370

FlashUtils protocol: enabled

Telnet protocol: enabled

SSH protocol: enabled

Ping protocol: enabled

SNMPv3 protocol: enabled