Specifications

VS-1200-S Data Acccess Switch20

4.1.2 Password Recovery

Password Recovery is provided for cases where a user has forgotten the Superuser and/or

Administrator login password. Password recovery is accomplished by connecting to the unit serially

using a HyperTerminal like program and rebooting the unit. As the power-up sequence is occurring,

depress <Control> <C>. Upon receipt of this command, a text recovery key will be generated and

displayed prior to the prompt. This key is used to reset the passwords. An example recovery key

prompt is: 617A6185774$

You must call Datacom Service Center with this recovery key in order to obtain the required

response to reset passwords. Given a valid reset response, the factory default passwords will be

saved in Non-Volatile memory. If an invalid response is given, a new recovery key will be calculated

and displayed at the prompt, as described above, after first clearing the screen.

4.1.3 Basic Commands (Read Only Access)

The following section shows the long form of the basic command set with the shortcut input for the

command noted in parenthesis. All commands, either the exact long form or the shortcut form, are

entered after the prompt (default >) at the cursor. No auto-fill mode is available. After the topic

heading, a brief overview of the command display function is given followed by an example

(Example: >) command input.

4.1.3.1 HELP (HE) or (?)

When this command is entered, a list of commands, their shortcut inputs, and their descriptions will

display. For the use and application of each command, refer to the individual command description

within this section. The HELP command displays the available commands depending upon the

specific product and not in ascending order as shown:

Example: > ?

Available commands:

ADD USER AD US Add User

DELETE USER DE US Delete User

EDIT USER ED US Change Username/Password

EXIT EX Exit Shell

HELP HE / ? Show Help

POWER STATUS PO ST Show Power Supply Status

SET DATE SE DA Set System Date

SET GATEWAY SE GA Set Default Gateway

SET IP SE IP Set IP [subnet mask] [default gateway]

SET LINK PROTECT SE LP Set Link Protect parameters

SET PING SE PI Set Ping ON or OFF

SET PORT GROUP SE PO GR Set Group Name

SET PORT MONITOR SE PO MO Set Monitor Configuration

SET PORT NAME SE PO NA Set Port Name (max 32 bytes)

SET PORT SPEED SE PO SP Set Port Speed

SET PORT VTAG SE PO VT Set Port VTAG Stripping

SET PORT VTAP SE PO VP Set Port VTAP

SET PROMPT SE PR Set Command Prompt (max 32 bytes)

SET SNMPv3 SE V3 Set SNMP ON or OFF